Posted on — Leave a comment

Fishing with Jason, Cindy, and John…4/8/2023

After a bunch of reschedules this past week, I was finally able to start the season with my Wisconsin crew of three. Jason Hendricks had fished with me a few years ago, with some friends, but this time he brought his father John and his wife Cindy along with him for a three day trip.

As you all know, the winds here have been wacky for several weeks, to where it would blow hard from one direction, and then be nice for a day, and then blow hard from the opposite direction, the next day. The full moon was last night, so typically, if the conditions are right, a good bunch of fish will spawn during the full moon, and ignore our offerings of plastic crank baits as they swim by. The jiggers will have more success with the frisky males on the reefs right now, than the trollers looking for big females.
Not all fish will spawn at the same time, however, so there will be fish that will still bite, so always go if you have the chance. 🙂


You all know my morning routine of getting gas and ice at the local station, so I’ll skip that fun part today, and get right into the what, where, and how.


We launched out of Catawba just before sunrise, so we could get the sunrise pic from the water. It’s been a long winter, and it’s my first sunrise pic out there this season, so that alone made it a good day for me. lol


We headed north to Niagara, and found some decent water. Unfortunately, my Helix’s sonar is acting up again. I just changed out the Y Cable yesterday, because it wasn’t reading on plane, and again….It wasn’t reading on plane this morning.
It eventually started working, closer to the end of our trip, though. It’s like the unit isn’t processing the info, or something, until the unit has been on for a few hours. I don’t understand it. Another reason I think it’s the unit, and not the Y cable now, is that the sonar screen’s scroll is set at 10, and intermittently it will slow way down and maybe scroll at a level 2?


Anyway….I knew the area, so we set up over 30′ of water, with Bandits behind Off Shore boards, on the south side of the reef. It was an ENE wind (early), and then began to switch to an ESE wind, with some gusts, later on.


Bandits were set at 80, 70, 60, and 50 on the port side, with the longest leads on the outside boards, and 75, 65, 55, 45 on the starboard side. After the port side caught 3 fish, to zero fish on the starboard side, we switched out the starboard side with P-10s (no weight), at 90, 70, 60, 50 (again, longest leads on the outside).


The speed on the surface was different than the speed at the Fish Hawk swimming down below. The SOG, as we trolled towards Crib Reef, said it was 1.6-1.7mph, and the Fish Hawk read 1.0mph at the lure.


Colors that caught the 5 fish this morning were…Bandits: (2) Red Headed Wonder Bread @ 40 back, RC Crush @60 back, Taco Salad @ 80 back, and one Fire Tiger P-10 @60 back.


When the waves started turning into 3’s and 4’s in the shallow reef area, we picked up and headed down inside, to Clinton Reef, and set up with a trolling pass towards the Portage River. Nada…just one pull back there. Didn’t mark much there either, which is unusual for this time of year.


Since we didn’t have time left to go anyplace else and start again, and it was windy and chilly, they opted to head in early to try again tomorrow. We will be launching out of Mazurik’s in the morning.
Stay tuned…


Capt Juls

Attached Images

    
Posted on — Leave a comment

Team up for better fishing this weekend

Since we are finally having some weekend weather to fish in, I’d thought i would post this up. I’ll be fishing all 4 days this weekend, Fri – Monday. If anyone else is interested in getting in on a group text to share info. Where they are biting, clear enough water to fish. That kind of stuff. Post up or pm phone number and each day I’ll do a group text.
I’ll be fishing out of Catawba, trying to find cleaner water.
Posted on — Leave a comment

Launch Ramp photos April 04

I was up doing some boat prep yesterday and on the way home decided to take a few photos of some of the Port Clinton to Sandusky Bay launch ramps as of April 04.

Portage River.

Catawba Island.

Mazurik (Matblehead).

Dempsey (Sandusky Bay West side)

Hope this helps.

Attached Images

    
Posted on — Leave a comment

Docks

Planning to fish middle to end of this week finally! Unsure with the looks of the lake exactly where to start. Anyone know if the docks are in at Catawba and Mazurik’s? Thanks in advance for the help.
Posted on — Leave a comment

Sunday Erie Report

Made it out today on Erie which turned out to be decent, which was surprising given the brutal winds yesterday. We caught 13 nice fish and also had another 12-14 “drive-by’s”, and 3 smallies that got off partway in.

P-10’s 55-70 back early then my Gold-Fermi “Bandit” did well later, 40 back. Speed was 1.0-1.1 mph. Found some decent water. Stained, but very fishable.

Posted on — Leave a comment

Getting the Gremlins out of the Boat…Finally, Ready to Go! :)

I had been trying to fish this past week, both on Tuesday and Thursday, to make sure everything was working before I started running any trips, but equipment gremlins kept me from fishing, either day.

Long story short…. Dan, at Fisherman’s Central, got my Minn-Kota and Humminbird working again, so I was good to go this morning.


Jen and I launched out of Dempsey’s at 9am and headed out to the lake to see if we could find some clean water. With the offshore winds the past two days, I figured all the mud that had been closer to shore would have blown out to mix with the cleaner water to the NNE, so we headed north, in search of the right mixing water.


Last night’s gusty winds had subsided to a light wind out of the north, by 9am, so the ride out wasn’t that bad.


We ended up starting at the 39/32 line, and set up on a WNW to ESE trolling pass, to a north to south pass.


Water temp was 39.4 degrees up there on the line, and only 36.9 in the south passage.


I set the speed to 1.2mph on the gps, and got the lines in the water. Jen ran Bandits on her side, with an RC Crush at 110 on the outside Off Shore board, Daydream Bandit at 65 on the middle board, and a Red Headed Wonder Bread Bandit on the inside board with a 2oz snap weight, set at 50/40.


My side ran the “Christmas Tree” “Bill Lewis Precise Walleye Crank” at 65 back on the middle board, and the Black Headed Chrome Wonder Bread, 30 back, on the inside board. The outside board ran a custom color from DJ’s Custom Eye Lures called, “FJ Spot” at 80 back.


After the baits were in the water, I proceeded to set up the “Fish Hawk” unit. Once it was up and running, I noticed that I had to be going 1.6mph (SOG) to have the baits swimming at 1.1mph, down below. That’s a big difference!


We only caught two walleye, before heading back in at noon. One nice 6ish pounder came on the Red Headed Wonder Bread at 50/40 2oz, and a nice eater bit the RC Crush at 110 back, unassisted.


I got the peace of mind, to know that everything is working in the boat again, as it should be. So, now, I just need Mother Nature to back off and get her act together, so I can get back to work. Several days may get rescheduled this week.


Stay tuned….


Capt Juls

Attached Images

   
Posted on — Leave a comment

Need guidance

I NEED GUIDANCE!!

I bought a boat late last year, 1995 Starcraft 191V Islander, really a nice boat. I had a Sea Nymph 195 GLS, I really liked that boat, but my previous didn’t want me to have it, nother story, nother time.

It’s has been 10+ years since I have fished Lake Erie, but I made it there a few times last year and it was wonderful.

Now I am making this boat mine.

It had a big planer board mast on the bow, two “Bert” shorty mast mounted directly to both the gunwales, mid way and a complex pulley system. The boards are two board, plastic, collapsible 28″ long. I have never used big boards, not something I may use, but it could be handy to have it in my arsenal, but I want to streamline the system. I removed the bow mast, I know the higher, the better, but not for me. I am wanting to mount the Berts shorty mast on a track system, mid gunwales. Bolted through 3/4″ Osage ” wood” and 5/32″ Aluminum.

I have researched this and ask questions, but apparently I didn’t
ask the right ones, the right way.

1). Will the Berts shorty work in any of the track systems, Traxtech, Bert’s, Cannon etc?

2. Are the tracks tough enough to handle the boards?

May use one to two lines per side, more than likely just one, just me and grandson. Probably no more than 50 feet out, per side.

Thanks for reading the long commentary, but I wanted to be as detailed as possible.

Thanks
Johnny D